Current monitoring relay MEANDR RCT-1, 2, 40, RPN-1, etc.

Current monitoring relay RCT-1, RCT-2

The RCT-1 and RCT-2 current monitoring relays are designed to issue a control signal when the output of the current value in single-phase networks is detected above or below the set value. The current monitoring relay is used to monitor overloads, consumption and diagnostics of remote equipment (short circuit, reduced or increased current consumption). RCT-1 - control of currents up to 1A or up to 5A. RCT-2 - control of currents up to 2A or up to 10A.

• RCT-1, RCT-2. Passport

RCT-40 current monitoring relay

The RCT-40 current monitoring relay is designed to issue a control signal when the output of a current value above the set value is detected. The current monitoring relay is used to control overloads of machines, electric motors or other electrical equipment, to monitor consumption, diagnose remote equipment (short circuit, reduced or increased current consumption).

• RCT-40. Technical description

Current relay RT-40M-20

The RT-40M current relay is intended for use in relay protection circuits and automation of power systems as a device that reacts to exceeding the permissible current. The relay can be used to monitor the overload of electric motors or other electrical equipment, to monitor consumption, current protection, diagnostics of equipment condition (short circuit, reduced or increased current consumption).

• RT-40M-20. Technical description

Universal RT-40U current monitoring relay

The RT-40U current relay is intended for use in relay protection circuits and automation of power systems as a device that reacts to exceeding the permissible current. The relay can be used to control the overload of electric motors or other electrical equipment, to monitor consumption, current protection, diagnostics of equipment condition (short circuit, reduced or increased current consumption).

• RT-40U. Passport

Load priority relay RPN-1, 2

The RPN-1, 2 priority relay is designed to redistribute electricity consumption in electrical systems with a limited maximum power. If the current consumption is exceeded, the priority relay will turn off the non-priority load. It is also possible to use a priority relay for use in relay protection and emergency automation circuits as a maximum current relay to protect electrical machines, transformers, etc. equipment in case of short circuits and overloads.

• RPN-1, 2. Passport

Catalog